আমি আপনাদের জন্য কিছু মোবাইল কোর্ড দিচ্ছি ডাউনলোড করে নিন। আর আমার জন্য দোয়া করবেন আপনাদের যেন আরো মোবাইল টিপস দিতে পারি।
Phone codes
Nokia
·
# 7370925538 # (valet code reset)
6230
* # 746025625 # [* # sim0clock #]
* # 92702689 # [* # war0anty #]
* # 7370925538 # (valet code reset) 6230
* # 746025625 # [* # sim0clock #]
* # 92702689 # [* # war0anty #]
To access the service menu of the phone by dialing * 3001 # xxxxx #, where xxxxx - security code (security code), which defaults to 12345. Thus, to enter will need to dial * 3001 # 12345 # In this mode, for example, you can change the name of the network operator is displayed in the standby mode. To do this, select NAM1, scroll to the sub-Alpha Tag, change it at will (for example, write Vovochka and click OK. Exit is off and on the phone.
It is possible that this code works on other phones (51hh, 61hh).
* # 0000 #, birth date and phone version prog.obespecheniya
* # 06 #, on many phones imei
* # 92702689 #, then a * bnutoe menu, I do not know why
* # 3370 # and * # 3370 *- on and off the quality of communication, like that, but not all the operators of this crap is supported. Near the Nokia had patched v 5.79
service code NOKIA 5120&5125:
Besides from the above there are still a couple SERVICE CODE
1) * # 639 # (* # NEW #) is used to add numbers ie you can register multiple phone numbers, and switch between them.
2) * # 92772689 # (* # WARRANTY #)
1) The serial number
2) release date
3) The date of the reprogramming
4) The date of last repair.
5) Includes data
6) The total talk time.
3) * # 837 # or * # VER # version of the phone (not supported on all models)
* # 746025625 # [* # sim0clock #]
* # 92702689 # [* # war0anty #]
* # 7370925538 # (valet code reset) 6230
* # 746025625 # [* # sim0clock #]
* # 92702689 # [* # war0anty #]
To access the service menu of the phone by dialing * 3001 # xxxxx #, where xxxxx - security code (security code), which defaults to 12345. Thus, to enter will need to dial * 3001 # 12345 # In this mode, for example, you can change the name of the network operator is displayed in the standby mode. To do this, select NAM1, scroll to the sub-Alpha Tag, change it at will (for example, write Vovochka and click OK. Exit is off and on the phone.
It is possible that this code works on other phones (51hh, 61hh).
* # 0000 #, birth date and phone version prog.obespecheniya
* # 06 #, on many phones imei
* # 92702689 #, then a * bnutoe menu, I do not know why
* # 3370 # and * # 3370 *- on and off the quality of communication, like that, but not all the operators of this crap is supported. Near the Nokia had patched v 5.79
service code NOKIA 5120&5125:
Besides from the above there are still a couple SERVICE CODE
1) * # 639 # (* # NEW #) is used to add numbers ie you can register multiple phone numbers, and switch between them.
2) * # 92772689 # (* # WARRANTY #)
1) The serial number
2) release date
3) The date of the reprogramming
4) The date of last repair.
5) Includes data
6) The total talk time.
3) * # 837 # or * # VER # version of the phone (not supported on all models)
Ericsson
388
Pokazyvatsya EMEI (International Mobile Equippment Identity) * # 06 #>
Sets the English menu * # 0000 #>
Displays the software version> *>
To access the menu without SIM-card ** 04 * 0000 * 0000 * 0000 #> to display "Wrong Pin" (wrong PIN-code), press NO and you will have access to everything.
SP Lock tie the phone to a SIM-card, which does not allow to use SIM-card of another operator. To ativirovat / deactivate the need to:
For a more detailed entry in the menu 923885 MENU>
Test Mode - well, it's clear that the 904,059 MENU>, to get out of this mode - disconnect the battery.
Reset Counters - reset all settings 904060 MENU>
These commands are suitable as well, and to models DH336, DH338, DH343, DH353, DF388.
GA628
Shows IMEI * # 06 # *>
Sets the phone's menu into English * # 0000 #>
Shows the date and time * # 103 #> Yes
Displays the software version> *>
To quickly redial the last call 0 #>
Access menu without SIM card ** 04 * 0000 * 0000 * 000 #> When the display shows "Wrong Pin" (wrong Pin code), press NO>, you have access to all menus.
View Battery No> wait 2 seconds.
GA688
Shows IMEI * # 06 # *>
If you want to count your phone is not fixed times during your call: Mr. Abery destination number and press "Yes". When you see the inscription "Connectiong", press "CLR", then "0", "#" and "No", to turn off the phone. Perfect after this call your machine probably will not notice, though there is no absolute guarantee.
GF788
Shows IMEI * # 06 #>
Displays the software version> *>
Speed dialing, last call 0 #>
Pokazyvatsya EMEI (International Mobile Equippment Identity) * # 06 #>
Sets the English menu * # 0000 #>
Displays the software version> *>
To access the menu without SIM-card ** 04 * 0000 * 0000 * 0000 #> to display "Wrong Pin" (wrong PIN-code), press NO and you will have access to everything.
SP Lock tie the phone to a SIM-card, which does not allow to use SIM-card of another operator. To ativirovat / deactivate the need to:
For a more detailed entry in the menu 923885 MENU>
Test Mode - well, it's clear that the 904,059 MENU>, to get out of this mode - disconnect the battery.
Reset Counters - reset all settings 904060 MENU>
These commands are suitable as well, and to models DH336, DH338, DH343, DH353, DF388.
GA628
Shows IMEI * # 06 # *>
Sets the phone's menu into English * # 0000 #>
Shows the date and time * # 103 #> Yes
Displays the software version> *>
To quickly redial the last call 0 #>
Access menu without SIM card ** 04 * 0000 * 0000 * 000 #> When the display shows "Wrong Pin" (wrong Pin code), press NO>, you have access to all menus.
View Battery No> wait 2 seconds.
GA688
Shows IMEI * # 06 # *>
If you want to count your phone is not fixed times during your call: Mr. Abery destination number and press "Yes". When you see the inscription "Connectiong", press "CLR", then "0", "#" and "No", to turn off the phone. Perfect after this call your machine probably will not notice, though there is no absolute guarantee.
GF788
Shows IMEI * # 06 #>
Displays the software version> *>
Speed dialing, last call 0 #>
To disable the
SP-encoding (provided that the PIN-code enabled device): When you request a
PIN-code, press "C", then - the up arrow or down arrow. Click the
"C" until the display clears. Then enter the command change PIN-code,
but do not change it in fact - ** 04 * PIN * PIN * PIN #> The only problem
is that this procedure should be repeated each time the apparatus.
6110
To reduce electricity consumption can disable EFR (Enhanced Full Rate) # 3370 #>
To activate EFR * 3370 #>
To reduce the rate of battery discharge, and enable HR (Half Rate) * 4720 #> then turn off and back on the phone.
To enable HR # 4720 #>
To view IMEI number * # 06 #>
Show software version * # 0000 #>
The entrance to the special menu * # 92702689 #> Commands in a special menu:
6232 OK indicates the month and year
7332 OK indicates the last modification date in the program
7832 OK indicates the date of purchase (if entered)
37832 OK you can enter the date of sale MMYY ('re careful then you can not change)
9268 OK indicates the serial number (IMEI)
7110
View the firmware version * # 0000 #>
View the IMEI * # 06 #>
Log into the service menu: * # 92702689 #> Consistently pressing down you'll see after the IMEI:
An IMEI (International Mobile Equipment Identification)
2 MM / YY (date)
3 Date of acquisition (here you can vvesi acquisition date, if your phone is new. Remember that the date is entered once, and if you were wrong date to fix it later it will be impossible!
4 Date of repairs (if repaired)
5 Date of transmission to the user? NOTE: To exit from this mode should be switched off and re-enable the device.
Check the support card mode SIM-clock-stop (only for firmware version 5.24 or later) * # 746025625 #>
Activate Enhanced Full Rate Codec (EFR): * 3370 #> will be activated after restarting the phone (consumes more power) Off Enhanced Full Rate Codec (EFR): # 3370 #> and EFR will be disabled when you restart the phone
Activate Half Rate Codec: (only available for firmware version 4.33 or earlier), enter * 4720 #> and Half Rate Mode will be enabled after restarting the phone Deactivate Half Rate Codec: enter Enable # 4720 #> and the Half Rate Codec will be deactivated after a reboot the phone
6110
To reduce electricity consumption can disable EFR (Enhanced Full Rate) # 3370 #>
To activate EFR * 3370 #>
To reduce the rate of battery discharge, and enable HR (Half Rate) * 4720 #> then turn off and back on the phone.
To enable HR # 4720 #>
To view IMEI number * # 06 #>
Show software version * # 0000 #>
The entrance to the special menu * # 92702689 #> Commands in a special menu:
6232 OK indicates the month and year
7332 OK indicates the last modification date in the program
7832 OK indicates the date of purchase (if entered)
37832 OK you can enter the date of sale MMYY ('re careful then you can not change)
9268 OK indicates the serial number (IMEI)
7110
View the firmware version * # 0000 #>
View the IMEI * # 06 #>
Log into the service menu: * # 92702689 #> Consistently pressing down you'll see after the IMEI:
An IMEI (International Mobile Equipment Identification)
2 MM / YY (date)
3 Date of acquisition (here you can vvesi acquisition date, if your phone is new. Remember that the date is entered once, and if you were wrong date to fix it later it will be impossible!
4 Date of repairs (if repaired)
5 Date of transmission to the user? NOTE: To exit from this mode should be switched off and re-enable the device.
Check the support card mode SIM-clock-stop (only for firmware version 5.24 or later) * # 746025625 #>
Activate Enhanced Full Rate Codec (EFR): * 3370 #> will be activated after restarting the phone (consumes more power) Off Enhanced Full Rate Codec (EFR): # 3370 #> and EFR will be disabled when you restart the phone
Activate Half Rate Codec: (only available for firmware version 4.33 or earlier), enter * 4720 #> and Half Rate Mode will be enabled after restarting the phone Deactivate Half Rate Codec: enter Enable # 4720 #> and the Half Rate Codec will be deactivated after a reboot the phone
Phone codes
Alcatel
Master Codes
- 25228352
- 25228353
- 83227423 (TH3 / 4, BH4, BF5, BG3, BF3 / 4 ..)
# # # 337 * 07 # - master reset (with SIM)
# # # 847 # - factory reset (with SIM)
Alcatel 835 formating - ** 0102 #
Secret codes for phones Alcatel
One Touch Club Dualband # 06 # displays IMEI (International Mobile Equipment Identity) code is 000000 * entry into the service menu
TRACES - channel indicator menus (netmonitor indicated with the network settings)
SWOFF CODES - log off the phone
EMPTY SWOFF - clearing log off the phone
CTRL CHARDGE - control battery
CHEKER - display test
- 25228352
- 25228353
- 83227423 (TH3 / 4, BH4, BF5, BG3, BF3 / 4 ..)
# # # 337 * 07 # - master reset (with SIM)
# # # 847 # - factory reset (with SIM)
Alcatel 835 formating - ** 0102 #
Secret codes for phones Alcatel
One Touch Club Dualband # 06 # displays IMEI (International Mobile Equipment Identity) code is 000000 * entry into the service menu
TRACES - channel indicator menus (netmonitor indicated with the network settings)
SWOFF CODES - log off the phone
EMPTY SWOFF - clearing log off the phone
CTRL CHARDGE - control battery
CHEKER - display test
Bosh
909 Dual
* # 06 # displays IMEI (International Mobile Equipment Identity) code
* # 0000 # Set the menu in English
* # 3370 # set Enhaced Full Rate (mode improves sound quality)
# 3370 # turns off Enhaced Full Rate
* # 9000 # to enter the SIM lock code
* # 9001 # to enter the corporate lock code (Bosch 908)
* # 9002 # to enter the provider lock code (Bosch 908)
* # 9003 # to enter a network lock code
* # 9004 # to enter the subset lock code
* # 9100 # to remove the SIM lock code
* # 9101 # to remove the corporate lock code
* # 9102 # to remove the provider lock code
* # 9103 # to remove the network lock code
* # 9104 # to remove the subset lock code * # 3262255 * 8378 # (* # DANCALL * TEST #) to open a secret Engineering menu. (Menu 10)
10. Engineering
10.1 MS Info
10.1.1 on
10.1.2 off
10.2 Software details
10.2.1 Software version
10.2.2 EEPROM version
10.2 Test / Production details
10.3.1 Hardware data
10.3.2 Production data
10.3.3 Service data
10.3.4 Mechanical data
* # 06 # displays IMEI (International Mobile Equipment Identity) code
* # 0000 # Set the menu in English
* # 3370 # set Enhaced Full Rate (mode improves sound quality)
# 3370 # turns off Enhaced Full Rate
* # 9000 # to enter the SIM lock code
* # 9001 # to enter the corporate lock code (Bosch 908)
* # 9002 # to enter the provider lock code (Bosch 908)
* # 9003 # to enter a network lock code
* # 9004 # to enter the subset lock code
* # 9100 # to remove the SIM lock code
* # 9101 # to remove the corporate lock code
* # 9102 # to remove the provider lock code
* # 9103 # to remove the network lock code
* # 9104 # to remove the subset lock code * # 3262255 * 8378 # (* # DANCALL * TEST #) to open a secret Engineering menu. (Menu 10)
10. Engineering
10.1 MS Info
10.1.1 on
10.1.2 off
10.2 Software details
10.2.1 Software version
10.2.2 EEPROM version
10.2 Test / Production details
10.3.1 Hardware data
10.3.2 Production data
10.3.3 Service data
10.3.4 Mechanical data
Ericsson
388
Pokazyvatsya EMEI (International Mobile Equippment Identity) * # 06 #>
Sets the English menu * # 0000 #>
Displays the software version> *>
To access the menu without SIM-card ** 04 * 0000 * 0000 * 0000 #> to display "Wrong Pin" (wrong PIN-code), press NO and you will have access to everything.
SP Lock tie the phone to a SIM-card, which does not allow to use SIM-card of another operator. To ativirovat / deactivate the need to:
For a more detailed entry in the menu 923885 MENU>
Test Mode - well, it's clear that the 904,059 MENU>, to get out of this mode - disconnect the battery.
Reset Counters - reset all settings 904060 MENU>
These commands are suitable as well, and to models DH336, DH338, DH343, DH353, DF388.
GA628
Shows IMEI * # 06 # *>
Sets the phone's menu into English * # 0000 #>
Shows the date and time * # 103 #> Yes
Displays the software version> *>
To quickly redial the last call 0 #>
Access menu without SIM card ** 04 * 0000 * 0000 * 000 #> When the display shows "Wrong Pin" (wrong Pin code), press NO>, you have access to all menus.
View Battery No> wait 2 seconds.
GA688
Shows IMEI * # 06 # *>
If you want to count your phone is not fixed times during your call: Mr. Abery destination number and press "Yes". When you see the inscription "Connectiong", press "CLR", then "0", "#" and "No", to turn off the phone. Perfect after this call your machine probably will not notice, though there is no absolute guarantee.
GF788
Shows IMEI * # 06 #>
Displays the software version> *>
Speed dialing, last call 0 #>Access menu without Sim card ** 04 * 0000 * 0000 * 0000 #> When the display shows "Wrong Pin" (wrong Pin code), press NO and you have access to all menus.
Battery indicator in the phone off NO> and wait for 2 seconds
GF768
Editing the welcome.
1. Sign in Keylock menu.
2. Set lock to Auto.
3. Click YES and then hold the left arrow until you see the Greetings menu.
GF788 GF768 menu in your phone! (1)
1. Sign in EDIT menu and press YES.
2. Press the number "2" then YES.
3. In the "NAME" hold "2" until the number "2". Press YES.
4. Press YES again (to save the item) then BYSTROnazhmite and hold the left arrow until the display shows "SIZE".
5. Click YES and select the "Full size". Now you will have the menu as well as in GF788.
GF788 GF768 menu in your phone! (2)
1. Sign in MissedCall
2. Clear List
3. Press the right arrow -> in a couple of seconds
4. SIZE menu appears
5. Select YES and exit from there
Note: This code works with version 990122.
GF788 GF768 menu in your phone! (3)
1. Sign in and set the ringer volume and press YES.
2. When 'STORED' will appear - hold the right arrow until the display shows 'Extended Menu'
3. Choose the "Activate" from the menu
Note: This code works with version 980910. SH888
* # 06 # - shows the IMEI (International Mobile Equipment Identity) code
>**>> - Information about the version of IR. If you click YES, you can check the driver version
The Service Provider (SP) Lock option is used to link the phone to a specific SIM card. Moreover, if you insert another operator, the phone will refuse to work, but the map of the same operator will do. In order that would activate or deactivate the lock mode needs a special secret code that is not available to end users.
How to enable this mode:
** - The choice of language?
> *> - The choice of language?
Pokazyvatsya EMEI (International Mobile Equippment Identity) * # 06 #>
Sets the English menu * # 0000 #>
Displays the software version> *>
To access the menu without SIM-card ** 04 * 0000 * 0000 * 0000 #> to display "Wrong Pin" (wrong PIN-code), press NO and you will have access to everything.
SP Lock tie the phone to a SIM-card, which does not allow to use SIM-card of another operator. To ativirovat / deactivate the need to:
For a more detailed entry in the menu 923885 MENU>
Test Mode - well, it's clear that the 904,059 MENU>, to get out of this mode - disconnect the battery.
Reset Counters - reset all settings 904060 MENU>
These commands are suitable as well, and to models DH336, DH338, DH343, DH353, DF388.
GA628
Shows IMEI * # 06 # *>
Sets the phone's menu into English * # 0000 #>
Shows the date and time * # 103 #> Yes
Displays the software version> *>
To quickly redial the last call 0 #>
Access menu without SIM card ** 04 * 0000 * 0000 * 000 #> When the display shows "Wrong Pin" (wrong Pin code), press NO>, you have access to all menus.
View Battery No> wait 2 seconds.
GA688
Shows IMEI * # 06 # *>
If you want to count your phone is not fixed times during your call: Mr. Abery destination number and press "Yes". When you see the inscription "Connectiong", press "CLR", then "0", "#" and "No", to turn off the phone. Perfect after this call your machine probably will not notice, though there is no absolute guarantee.
GF788
Shows IMEI * # 06 #>
Displays the software version> *>
Speed dialing, last call 0 #>Access menu without Sim card ** 04 * 0000 * 0000 * 0000 #> When the display shows "Wrong Pin" (wrong Pin code), press NO and you have access to all menus.
Battery indicator in the phone off NO> and wait for 2 seconds
GF768
Editing the welcome.
1. Sign in Keylock menu.
2. Set lock to Auto.
3. Click YES and then hold the left arrow until you see the Greetings menu.
GF788 GF768 menu in your phone! (1)
1. Sign in EDIT menu and press YES.
2. Press the number "2" then YES.
3. In the "NAME" hold "2" until the number "2". Press YES.
4. Press YES again (to save the item) then BYSTROnazhmite and hold the left arrow until the display shows "SIZE".
5. Click YES and select the "Full size". Now you will have the menu as well as in GF788.
GF788 GF768 menu in your phone! (2)
1. Sign in MissedCall
2. Clear List
3. Press the right arrow -> in a couple of seconds
4. SIZE menu appears
5. Select YES and exit from there
Note: This code works with version 990122.
GF788 GF768 menu in your phone! (3)
1. Sign in and set the ringer volume and press YES.
2. When 'STORED' will appear - hold the right arrow until the display shows 'Extended Menu'
3. Choose the "Activate" from the menu
Note: This code works with version 980910. SH888
* # 06 # - shows the IMEI (International Mobile Equipment Identity) code
>**>> - Information about the version of IR. If you click YES, you can check the driver version
The Service Provider (SP) Lock option is used to link the phone to a specific SIM card. Moreover, if you insert another operator, the phone will refuse to work, but the map of the same operator will do. In order that would activate or deactivate the lock mode needs a special secret code that is not available to end users.
How to enable this mode:
** - The choice of language?
> *> - The choice of language?
Huawei
MASTER SECURITY CODE
309296
3092
9296
309296
3092
9296
Lg
2945 # * # - service
menu (code reset) (W510 W3000 G5300 L1100 C1200 G7100 ...)
2945 # *- hold (LG 500,600)
B1200 * pwr, 6,6,8 Service Menu
B1300 * pwr, 1,5,9 Service Menu
Security Removing Code For Lg 8110,8120.
47328545454 #
Or
277634 # * #
LG:
For Lg 2945 # * # - Engineering Menu
For Lg 2945 # * # * 1 - Engineers menu 2
codes to unlock cell phones.
More codes for lg:
LG * 6861 #
2945 # *
LG
* # 06 # - Display IMEI
Codes enter the service menu
* 789 # Send - LG - 200
2945 # * - (hold) LG - 500
2945 # * # - LG - 510
2945 # *- hold (LG 500,600)
B1200 * pwr, 6,6,8 Service Menu
B1300 * pwr, 1,5,9 Service Menu
Security Removing Code For Lg 8110,8120.
47328545454 #
Or
277634 # * #
LG:
For Lg 2945 # * # - Engineering Menu
For Lg 2945 # * # * 1 - Engineers menu 2
codes to unlock cell phones.
More codes for lg:
LG * 6861 #
2945 # *
LG
* # 06 # - Display IMEI
Codes enter the service menu
* 789 # Send - LG - 200
2945 # * - (hold) LG - 500
2945 # * # - LG - 510
2945 # * 1 # -
(second service menu) LG - 510
2945 # * - (hold) LG - 600
# And ON together, then 6 6 8 LG - B1200
* 6861 # initialize after loading LG - B1200
* 8375 # - LG - B1200
2945 # * # - LG - 5200
Service Menu - 2945 # * #
2945 # * - (hold) LG - 600
# And ON together, then 6 6 8 LG - B1200
* 6861 # initialize after loading LG - B1200
* 8375 # - LG - B1200
2945 # * # - LG - 5200
Service Menu - 2945 # * #
Motorola
Standard Code - 1234
or 0000 unlock Motors 19h: up to version 1.71 - code 19980722, for the higher
version and C200, C205 - code 20010903
Removing code C350
1. * # 06 #
2.Nazhimaem the Menu then 048263 * (buttons to press quickly for 2 seconds)
3.Poyavitsya input field
4.Vvodite 18 * 0 (Master Reset)
5.Vvodite 18 * 1 (Master Clear)
codes to unlock cell phones.
master code for Motorola T205/T190/T191
master code - 19980722 ok
(T190, T191, T205) master code
- 19980722
- 20010903
P2K test menu:
* # 06 #, menu, menu, 048263 *
Test comands:
32 * 116 * 1 * 0 * 0 - read phone code
32 * 118 * 1 * 0 * 0 - read security code
18 * 0 - factory reset, phone code off
18 * 1 - master reset
Removing code C350
1. * # 06 #
2.Nazhimaem the Menu then 048263 * (buttons to press quickly for 2 seconds)
3.Poyavitsya input field
4.Vvodite 18 * 0 (Master Reset)
5.Vvodite 18 * 1 (Master Clear)
codes to unlock cell phones.
master code for Motorola T205/T190/T191
master code - 19980722 ok
(T190, T191, T205) master code
- 19980722
- 20010903
P2K test menu:
* # 06 #, menu, menu, 048263 *
Test comands:
32 * 116 * 1 * 0 * 0 - read phone code
32 * 118 * 1 * 0 * 0 - read security code
18 * 0 - factory reset, phone code off
18 * 1 - master reset
54 * 18 * 1 - full
phone reset
10 * 0 * 6 - select 900/1800
32 * 279 * 1 * 0 * 8 - model
32 * 383 * 1 * 0 * 0 - flex version
Hard reset MPx200 - blue button power on
Codes for Motorola:
View the IMEI * # 06 #>
Revitalization of the 100 numbers in your phone ppp087p1p> OK
Activating hours ppp123p1p> OK does not work on all phones, it all depends on the firmware.
Activation of the engineering menu ppp000p1p> ppp113p1p> OK (reboot)
Set alarm for incoming messages ppp276p1p>
There is a possibility to send SMS from Address Book, you just need to click ppp272p1p>
To be able to manually switch the frequency bands 900, 1800, 900/1800 to: ppp203p1p, ppp204p1p, ppp205p1p, ppp206p1p>
To activate the menu, music editing must: ppp278p1p>
To activate a new alarm clock should dial only works with new firmware
To include a new menu item "Game" should dial only works with new firmware
To enable the new game Bricks should dial only works with new firmware
To enable the new game Tower of Hanoi should dial only works with new firmware
To enable the new game of Baccarat, type only works with new firmware
To enable the new calculator should dial only works with new firmware
TEST MODE - new to enter the Test Mode, to the main menu, hold for 3-4 seconds press "#"
In order to use some functions in menu mode you can enter the test cell, and "#"
01 # - Exit Test Mode
19 # - shows the software version
57 # - resets all the phone settings to factory
MOTOROLLA T2288View the IMEI * # 06 #>
Revitalization of the 100 numbers in your phone ppp087p1p> OK
Activating hours ppp123p1p> OK does not work on all phones, it all depends on the firmware.
Activation of the engineering menu ppp000p1p> ppp113p1p> OK (reboot)
Set alarm for incoming messages ppp276p1p>
There is a possibility to send SMS from Address Book, you just need to click ppp272p1p>
To be able to manually switch the frequency bands 900, 1800, 900/1800 to: ppp203p1p, ppp204p1p, ppp205p1p, ppp206p1p>
To activate the menu, music editing must: ppp278p1p>
To activate a new alarm clock should dial works only with new firmware
To include a new menu item "games" have to muster only works with new firmware
To enable the new game Bricks should dial works only with new firmware
To enable the new game Tower of Hanoi should dial works only with new firmware
To enable the new game of Baccarat, dial only works with new firmware
To enable the new calculator should dial works only with new firmware
Service menu in the Motorola C350 (suitable for many other "version of C»)
To enter the service menu must quickly press the combination of the following buttons: Menyu048263 *
The screen should be prompted to enter commands: Opcode :___________
Then you can enter commands, such as 54 * 18 * 1 - full reset the phone. (54 * - obligatory for all the top teams)
Teams:
0 * 0 * 0 Select tone 0
0 * 0 * 1 Select tone 1
0 * 0 * 2 Select tone 2
0 * 0 * 3 Select tone 3
0 * 0 * 4 Select tone 4
0 * 0 * 5 Select tone 5
0 * 0 * 6 Select tone 6
0 * 0 * 7 Select tone 7
0 * 0 * 8 Select tone 80*
10 * 0 * 6 - select 900/1800
32 * 279 * 1 * 0 * 8 - model
32 * 383 * 1 * 0 * 0 - flex version
Hard reset MPx200 - blue button power on
Codes for Motorola:
View the IMEI * # 06 #>
Revitalization of the 100 numbers in your phone ppp087p1p> OK
Activating hours ppp123p1p> OK does not work on all phones, it all depends on the firmware.
Activation of the engineering menu ppp000p1p> ppp113p1p> OK (reboot)
Set alarm for incoming messages ppp276p1p>
There is a possibility to send SMS from Address Book, you just need to click ppp272p1p>
To be able to manually switch the frequency bands 900, 1800, 900/1800 to: ppp203p1p, ppp204p1p, ppp205p1p, ppp206p1p>
To activate the menu, music editing must: ppp278p1p>
To activate a new alarm clock should dial only works with new firmware
To include a new menu item "Game" should dial only works with new firmware
To enable the new game Bricks should dial only works with new firmware
To enable the new game Tower of Hanoi should dial only works with new firmware
To enable the new game of Baccarat, type only works with new firmware
To enable the new calculator should dial only works with new firmware
TEST MODE - new to enter the Test Mode, to the main menu, hold for 3-4 seconds press "#"
In order to use some functions in menu mode you can enter the test cell, and "#"
01 # - Exit Test Mode
19 # - shows the software version
57 # - resets all the phone settings to factory
MOTOROLLA T2288View the IMEI * # 06 #>
Revitalization of the 100 numbers in your phone ppp087p1p> OK
Activating hours ppp123p1p> OK does not work on all phones, it all depends on the firmware.
Activation of the engineering menu ppp000p1p> ppp113p1p> OK (reboot)
Set alarm for incoming messages ppp276p1p>
There is a possibility to send SMS from Address Book, you just need to click ppp272p1p>
To be able to manually switch the frequency bands 900, 1800, 900/1800 to: ppp203p1p, ppp204p1p, ppp205p1p, ppp206p1p>
To activate the menu, music editing must: ppp278p1p>
To activate a new alarm clock should dial works only with new firmware
To include a new menu item "games" have to muster only works with new firmware
To enable the new game Bricks should dial works only with new firmware
To enable the new game Tower of Hanoi should dial works only with new firmware
To enable the new game of Baccarat, dial only works with new firmware
To enable the new calculator should dial works only with new firmware
Service menu in the Motorola C350 (suitable for many other "version of C»)
To enter the service menu must quickly press the combination of the following buttons: Menyu048263 *
The screen should be prompted to enter commands: Opcode :___________
Then you can enter commands, such as 54 * 18 * 1 - full reset the phone. (54 * - obligatory for all the top teams)
Teams:
0 * 0 * 0 Select tone 0
0 * 0 * 1 Select tone 1
0 * 0 * 2 Select tone 2
0 * 0 * 3 Select tone 3
0 * 0 * 4 Select tone 4
0 * 0 * 5 Select tone 5
0 * 0 * 6 Select tone 6
0 * 0 * 7 Select tone 7
0 * 0 * 8 Select tone 80*
0 * 9 Select tone 9
0 * 0 * 124 Select tone 1 KHz
0 * 0 * 125 Select tone 2 KHz
0 * 0 * 126 Select tone 3 KHz
0 * 0 * 127 Select tone 4 KHz
0 * 1 * X Disable tone X
3 * 0 * 1 Enable vibrator
3 * 0 * 0 Disable vibrator
4 * 3 * 1 Enable speech coder full rate Audio loopback
4 * 3 * 0 Disable speech coder full rate
4 * 4 * 1 Enable speech coder enhanced full rate
1936 January 23, 2003 6809456A82
Troubleshooting C350 Series
4 * 4 * 0 Disable speech coder enhanced full rate
4 * 5 * 1 Enable speech coder half rate
4 * 5 * 0 Disable speech coder half rate
5 * 0 * 0 Set audio level 0 Audio level
5 * 0 * 1 Set audio level 1
5 * 0 * 2 Set audio level 2
5 * 0 * 3 Set audio level 3
5 * 0 * 4 Set audio level 4
5 * 0 * 5 Set audio level 5
5 * 0 * 6 Set audio level 6
5 * 0 * 7 Set audio level 7
5 * 0 * 8 Set audio level 8
5 * 0 * 9 Set audio level 9
5 * 0 * 10 Set audio level 10
5 * 0 * 11 Set audio level 11
5 * 0 * 12 Set audio level 12
5 * 0 * 13 Set audio level 13
0 * 0 * 124 Select tone 1 KHz
0 * 0 * 125 Select tone 2 KHz
0 * 0 * 126 Select tone 3 KHz
0 * 0 * 127 Select tone 4 KHz
0 * 1 * X Disable tone X
3 * 0 * 1 Enable vibrator
3 * 0 * 0 Disable vibrator
4 * 3 * 1 Enable speech coder full rate Audio loopback
4 * 3 * 0 Disable speech coder full rate
4 * 4 * 1 Enable speech coder enhanced full rate
1936 January 23, 2003 6809456A82
Troubleshooting C350 Series
4 * 4 * 0 Disable speech coder enhanced full rate
4 * 5 * 1 Enable speech coder half rate
4 * 5 * 0 Disable speech coder half rate
5 * 0 * 0 Set audio level 0 Audio level
5 * 0 * 1 Set audio level 1
5 * 0 * 2 Set audio level 2
5 * 0 * 3 Set audio level 3
5 * 0 * 4 Set audio level 4
5 * 0 * 5 Set audio level 5
5 * 0 * 6 Set audio level 6
5 * 0 * 7 Set audio level 7
5 * 0 * 8 Set audio level 8
5 * 0 * 9 Set audio level 9
5 * 0 * 10 Set audio level 10
5 * 0 * 11 Set audio level 11
5 * 0 * 12 Set audio level 12
5 * 0 * 13 Set audio level 13
5 * 0 * 14 Set audio
level 14
5 * 0 * 15 Set audio level 15
6 * 2 * 2 * 0 * 0 Set Audio Path. Int Mic, IntSpk, RX unmute, TX unmute
6 * 4 * 6 * 0 * 0 Set Audio Path. Boom Mic, Boom Spk, RX unmute, TX unmute
10 * 0 * 3 Set band GSM 900
10 * 0 * 4 Set band DCS 1800
10 * 0 * 5 Set band PCS 1900
10 * 0 * 6 Set dual band GSM 900 / 1800
10 * 1 * 0 Read band 3 = GSM 4 = DCS 5 = PCS 6 = GSM / DCS
18 * 0 Initialize non-volatile memory (Master Reset)
18 * 1 Initialize Non-volatile memory (Master Clear)
20 * X * 0 Load Channel number X Select Channel (Used for debugging Rx mode)
20 * 1 * 0 Load channel number 1 GSM Low channel
20 * 62 * 0 Load channel number 62 GSM Mid channel
20 * 124 * 0 Load channel number 124 GSM High channel
20 * 512 * 0 Load channel number 512 DCS Low channel
20 * 700 * 0 Load channel number 700 DCS Mid channel
20 * 885 * 0 Load channel number 885 CDS High channel
20 * 512 * 0 Load channel number 512 PCS Low channel
20 * 661 * 0 Load channel number 661 PCS Mid channel
20 * 810 * 0 Load channel number 810 PCS High channel
55 * 2 * 001 Test Display. All pixels ON
55 * 2 * 000 Test Display. All pixels OFF
55 * 2 * 002 Test Display. Checkerboard pattern A
Table 2. Manual Test Commands (Continued)
Key Sequence Test Function / Name Remarks
Level 1 and 2 Service Manual Troubleshooting
55 * 2 * 003 Test Display. Checkerboard pattern B
55 * 2 * 004 Test Display. Border pixels ON
* # 06 # IMEI Check No Test Mode Required
5 * 0 * 15 Set audio level 15
6 * 2 * 2 * 0 * 0 Set Audio Path. Int Mic, IntSpk, RX unmute, TX unmute
6 * 4 * 6 * 0 * 0 Set Audio Path. Boom Mic, Boom Spk, RX unmute, TX unmute
10 * 0 * 3 Set band GSM 900
10 * 0 * 4 Set band DCS 1800
10 * 0 * 5 Set band PCS 1900
10 * 0 * 6 Set dual band GSM 900 / 1800
10 * 1 * 0 Read band 3 = GSM 4 = DCS 5 = PCS 6 = GSM / DCS
18 * 0 Initialize non-volatile memory (Master Reset)
18 * 1 Initialize Non-volatile memory (Master Clear)
20 * X * 0 Load Channel number X Select Channel (Used for debugging Rx mode)
20 * 1 * 0 Load channel number 1 GSM Low channel
20 * 62 * 0 Load channel number 62 GSM Mid channel
20 * 124 * 0 Load channel number 124 GSM High channel
20 * 512 * 0 Load channel number 512 DCS Low channel
20 * 700 * 0 Load channel number 700 DCS Mid channel
20 * 885 * 0 Load channel number 885 CDS High channel
20 * 512 * 0 Load channel number 512 PCS Low channel
20 * 661 * 0 Load channel number 661 PCS Mid channel
20 * 810 * 0 Load channel number 810 PCS High channel
55 * 2 * 001 Test Display. All pixels ON
55 * 2 * 000 Test Display. All pixels OFF
55 * 2 * 002 Test Display. Checkerboard pattern A
Table 2. Manual Test Commands (Continued)
Key Sequence Test Function / Name Remarks
Level 1 and 2 Service Manual Troubleshooting
55 * 2 * 003 Test Display. Checkerboard pattern B
55 * 2 * 004 Test Display. Border pixels ON
* # 06 # IMEI Check No Test Mode Required
Master reset your
phone, you may need for example when selling phone:
-Turn on the phone
- Hit (FNC) -00 ** 83,786,633 - (STO) - # (the entrance to the service mode) - in the end should see US '
-We press 32 # (need to wait until piknet or reboot)
-Clears all timers, all of the phone book, all your settings back to default state;
the settings of your statement will essno (phone rezet about a minute) ...
codes for Motorola (can not remember whose article ... thanks aftoru
-Turn on the phone
- Hit (FNC) -00 ** 83,786,633 - (STO) - # (the entrance to the service mode) - in the end should see US '
-We press 32 # (need to wait until piknet or reboot)
-Clears all timers, all of the phone book, all your settings back to default state;
the settings of your statement will essno (phone rezet about a minute) ...
codes for Motorola (can not remember whose article ... thanks aftoru
To enter the service
menu must quickly press the combination of the following buttons: Menyu048263 *
The screen should be prompted to enter commands: Opcode :___________
Then you can enter commands, such as 54 * 18 * 1 - full reset the phone.
Rollback (return to previous state) is just - let's say you want to return the operator logo, dial Opcode and field 1,2,3,4 are the same as there, and field 5 (d) as in the string is rolled back. Everything.
Teams:
Check the microphone / speaker (loopback):
4 * 5 * 1
Phone code reading:
32 * 116 * 1 * 0 * 0
Reading the security code:
32 * 118 * 1 * 0 * 0
(Code pops up in a format 0030003000300030 ...
every fourth digit required, then you can fill in this case is four 0)
Check the transmitter:
10 * 0 * 6 - select the range of 900/1800
20 * N * 0 - N-channel selection
45 * M - M-choose the power level
7 * 0 * 1 - the inclusion of the DWP, transmission zeros
7 * 1 * 1 - the inclusion of the DWP, the transfer of units.
The screen should be prompted to enter commands: Opcode :___________
Then you can enter commands, such as 54 * 18 * 1 - full reset the phone.
Rollback (return to previous state) is just - let's say you want to return the operator logo, dial Opcode and field 1,2,3,4 are the same as there, and field 5 (d) as in the string is rolled back. Everything.
Teams:
Check the microphone / speaker (loopback):
4 * 5 * 1
Phone code reading:
32 * 116 * 1 * 0 * 0
Reading the security code:
32 * 118 * 1 * 0 * 0
(Code pops up in a format 0030003000300030 ...
every fourth digit required, then you can fill in this case is four 0)
Check the transmitter:
10 * 0 * 6 - select the range of 900/1800
20 * N * 0 - N-channel selection
45 * M - M-choose the power level
7 * 0 * 1 - the inclusion of the DWP, transmission zeros
7 * 1 * 1 - the inclusion of the DWP, the transfer of units.
Master Reset 18 * 0
Master Clear 18 * 1
Master Clear 18 * 1
Uclovie:
Halichie podklyuchennoy yclygi GPRS
Opcode "47" "OK"
Field 1 "424" "OK"
Field 2 "1" "OK"
Field 3 "1" "OK"
Field 4 "1" "OK"
Field 5 (D) "032" "OK"
Otkat: Field 5 (D) "000" "OK"
Results
F1: 0
Bce, kak tolko znachek GPRS poyavitcya nA ekpane, date is iccheznet.
Remove icon line
Opcode «1947» «OK»
Field 1 "50» «OK»
Field 2 1 »« OK »
Field 3, 1931 »« OK »
Field 4 "1» «OK»
Field 5 (D) «231» «OK»
Otkat: Field 5 (D) «247» «OK»
Results
F1: 0
Inzhenepnoe the menu:
Halichie podklyuchennoy yclygi GPRS
Opcode "47" "OK"
Field 1 "424" "OK"
Field 2 "1" "OK"
Field 3 "1" "OK"
Field 4 "1" "OK"
Field 5 (D) "032" "OK"
Otkat: Field 5 (D) "000" "OK"
Results
F1: 0
Bce, kak tolko znachek GPRS poyavitcya nA ekpane, date is iccheznet.
Remove icon line
Opcode «1947» «OK»
Field 1 "50» «OK»
Field 2 1 »« OK »
Field 3, 1931 »« OK »
Field 4 "1» «OK»
Field 5 (D) «231» «OK»
Otkat: Field 5 (D) «247» «OK»
Results
F1: 0
Inzhenepnoe the menu:
Nokia Smart
* # 06 # - IMEI
smartphone (IMEI number - consists of 15 digits, it is unique and everyone has
the phone). This number should match the number on the box.
* # 0000 # - the number of firmware
safe mode ("PENCIL" Power)
* # 7780 # - Restore the original (working) settings of the Smart
* # 7370 # - Reset smart to factory settings (ie, removed all the software, kotakty, calendar, etc. - Smart gets clean!)
WARNING! To use the latter two codes will need to enter your phone lock code (default 12345)!
Safe Mode when you turn on the phone - "PENCIL" "Power Buttion"
Booting into Safe:
1. Turn off the phone
2. Click "PENCIL" (and do not let)
3. Press the power button
4. Hold "PENCIL" to a full load!
* # 2820 # - the unique address Bluetoth-module for your device (you may need other devices that can not display names).
* # 7370925538 # - ochiska wallet (for 6600 and above - which is a "wallet").
* 3370 # (phone must reboot) improves the sound quality (the use of EFR), but decreases battery life.
# 3370 # - resets sound quality to normal (cancels the code * 3370 #).
EFR CODEC (Enhanced Full Rate)
This feature is in its turn, in theory, should significantly improve voice quality, but unfortunately, it must be supported mobile operator. When her work is slightly increased power consumption mode, the phone call (about 5%). It is known that none of Russian cellular operators do not support this feature. The principle is based on a different voice compression algorithms (ACELP) and has a wider bandwidth.
* 4720 # - Enable Half Rate Codec (HFR)
# 4720 # - Disable Half Rate Codec (HFR)
HR CODEC (Half Rate)
Significantly degrades the quality of speech, but saves battery somewhere at 30%. Again, it must be supported by a cellular operator.
* # 92702689 # - enter the service menu [* # war0anty #]
Secrets of the NOKIA 6600 and other smartphones
* # 06 # - IMEI smartphone
* # 0000 # - the number of firmware
safe mode ("PENCIL" Power)
* # 7780 # - Restore the original (working) settings of the Smart
* # 7370 # - Reset smart to factory settings (ie, removed all the software, kotakty, calendar, etc. - Smart gets clean!)
WARNING! To use the latter two codes will need to enter your phone lock code (default 12345)!
Safe Mode when you turn on the phone - "PENCIL" "Power Buttion"
Booting into Safe:
1. Turn off the phone
2. Click "PENCIL" (and do not let)
3. Press the power button
4. Hold "PENCIL" to a full load!
* # 2820 # - the unique address Bluetoth-module for your device (you may need other devices that can not display names).
* # 7370925538 # - ochiska wallet (for 6600 and above - which is a "wallet").
* 3370 # (phone must reboot) improves the sound quality (the use of EFR), but decreases battery life.
# 3370 # - resets sound quality to normal (cancels the code * 3370 #).
EFR CODEC (Enhanced Full Rate)
This feature is in its turn, in theory, should significantly improve voice quality, but unfortunately, it must be supported mobile operator. When her work is slightly increased power consumption mode, the phone call (about 5%). It is known that none of Russian cellular operators do not support this feature. The principle is based on a different voice compression algorithms (ACELP) and has a wider bandwidth.
* 4720 # - Enable Half Rate Codec (HFR)
# 4720 # - Disable Half Rate Codec (HFR)
HR CODEC (Half Rate)
Significantly degrades the quality of speech, but saves battery somewhere at 30%. Again, it must be supported by a cellular operator.
* # 92702689 # - enter the service menu [* # war0anty #]
Secrets of the NOKIA 6600 and other smartphones
* # 06 # - IMEI smartphone
* # 0000 # - Number of firmware
* # 7780 # - Restore the original (working) settings Smartphone
* # 7370 # - Reset smartphone to factory settings (removed all the software, kotakty, calendar, etc - the phone gets clean)
* # 2820 # - Code of Bluetooth (the unique address Bluetoth-module)
* # 7370925538 # - ochiska "Bymazhnika" (for 6600 and above - and eccentricity is "Bymazhnik).
Safe Mode When restarting the phone - "ABC" "Power Buttion" (a 3650 "ABC" - this "kapandashik)
Zagpyzka in Safe:
1. Turn off the phone
2. Hazhat "ABC" (and Do not otpyskat)
3. Hazhat knopky inclusion
4. Depzhat "ABC" to POLHOY zagpyzki phone!
And here is one additional way fopmatipovaniya phone (with all the data of losses) at the slychay if you can not even nabpat cherished code * # 7370 # or even zapystit tpybky: off clamp odnovpemenno tpi keys zelenyyu to answer, and zvezdochky klavishy "3." And tepep include tpyby not otpyskaya keys. Hachnetsya fopmatipovanie.
To use the code * # 7780 # and * # 7370 # will need to enter the lock code (default 12345).
# # 002 # to cancel all call forwarding.
** 004 * number # include forwarding all calls to number entered.
* # 7780 # - Restore the original (working) settings Smartphone
* # 7370 # - Reset smartphone to factory settings (removed all the software, kotakty, calendar, etc - the phone gets clean)
* # 2820 # - Code of Bluetooth (the unique address Bluetoth-module)
* # 7370925538 # - ochiska "Bymazhnika" (for 6600 and above - and eccentricity is "Bymazhnik).
Safe Mode When restarting the phone - "ABC" "Power Buttion" (a 3650 "ABC" - this "kapandashik)
Zagpyzka in Safe:
1. Turn off the phone
2. Hazhat "ABC" (and Do not otpyskat)
3. Hazhat knopky inclusion
4. Depzhat "ABC" to POLHOY zagpyzki phone!
And here is one additional way fopmatipovaniya phone (with all the data of losses) at the slychay if you can not even nabpat cherished code * # 7370 # or even zapystit tpybky: off clamp odnovpemenno tpi keys zelenyyu to answer, and zvezdochky klavishy "3." And tepep include tpyby not otpyskaya keys. Hachnetsya fopmatipovanie.
To use the code * # 7780 # and * # 7370 # will need to enter the lock code (default 12345).
# # 002 # to cancel all call forwarding.
** 004 * number # include forwarding all calls to number entered.
Secrets of NOKIA 3210, 3310, 3330, 8210, 8250, 8850, 9110
Shows the serial number of your phone (IMEI)
* # 06 #
Version of the Software
* # 0000 #
1 Line - Print
2 Line - Release Date prog. software.
3 Line - Phone Type.
Warranty codes:
* # 92702689 # (= * # war0anty #)
You will be prompted to enter a type of "warranty code",
You will see the service menu:
IMEI (International Mobile Equipment Identification)
Release Date Phone MM / YY
Date of purchase phone
Date of renovation
Transmit user data?
* 3370 # - Enhanced Mode full sized coding (increasing the quality of communication, reduced battery life)
# 3370 # - Deactivate the full sized mode coding.
Note: After entering these codes the
phone will restart with new settings.
You can check whether to stop the SIM Clock:
* # 746025625 # (= * # sim0clock #)
Codes to determine whether POC at the unit or not
Your Nokia may be blocked by 4 kinds of locks:
SPROVIDER-LOCK - 1
NETWORK-LOCK - 2
COUNTRY-LOCK - 3
SIMCARD-LOCK - 4
To check the status of these locks is introduced line:
# Pw (MASTERCODE) (y) #, where
- P = press * 3 times
- W = press * 4 times (in the original reverse w - 3 times, p - 4)
- = Press * 2 times
- MASTERCODE = exactly the thing which zalochili your machine. But to check the status of introduced 1234567890
- Y = a number from 1 to 4
If your phone is locked SP (Service Provider) code, which nezvesten, then try the following:
1. Should be included inquiry Pin code;
2. turn on the phone;
3. Pin code when prompted, press C, then up or down arrow;
4. Press C and hold until the display is cleared;
You can check whether to stop the SIM Clock:
* # 746025625 # (= * # sim0clock #)
Codes to determine whether POC at the unit or not
Your Nokia may be blocked by 4 kinds of locks:
SPROVIDER-LOCK - 1
NETWORK-LOCK - 2
COUNTRY-LOCK - 3
SIMCARD-LOCK - 4
To check the status of these locks is introduced line:
# Pw (MASTERCODE) (y) #, where
- P = press * 3 times
- W = press * 4 times (in the original reverse w - 3 times, p - 4)
- = Press * 2 times
- MASTERCODE = exactly the thing which zalochili your machine. But to check the status of introduced 1234567890
- Y = a number from 1 to 4
If your phone is locked SP (Service Provider) code, which nezvesten, then try the following:
1. Should be included inquiry Pin code;
2. turn on the phone;
3. Pin code when prompted, press C, then up or down arrow;
4. Press C and hold until the display is cleared;
5. Now enter the command change Pin
code, but without changing it;
** 04 * Pin * Pin * Pin #
This operation must be repeated each time the apparatus.
Half Rate Codec:
Inclusion:
* 4720 # - Half Rate will be activated after an overload of the phone (reduced power consumption)
Shutdown:
# 4720 # - Half Rate will be turned off after reloading phone
Enhanced Full Rate mode allows you to get much better sound quality at the same number of bits of information transmitted, but more than your ISP's network loads, the duration of talk time is decreased by about 5%
Half Rate Mode impairs sound quality, but offloads the network and enables the ISP to pass through it more calls, talk time duration will be increased by about na30%
Security code information in the IMEI (International Mobile Equipment Identity) provides:
XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type Approval Code (first 2 digits = country code).
FAC = Final Assembly Code (For Nokia FAC = 10).
SNR = Serial Number.
SP = Spare (always SP = 0).
** 04 * Pin * Pin * Pin #
This operation must be repeated each time the apparatus.
Half Rate Codec:
Inclusion:
* 4720 # - Half Rate will be activated after an overload of the phone (reduced power consumption)
Shutdown:
# 4720 # - Half Rate will be turned off after reloading phone
Enhanced Full Rate mode allows you to get much better sound quality at the same number of bits of information transmitted, but more than your ISP's network loads, the duration of talk time is decreased by about 5%
Half Rate Mode impairs sound quality, but offloads the network and enables the ISP to pass through it more calls, talk time duration will be increased by about na30%
Security code information in the IMEI (International Mobile Equipment Identity) provides:
XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type Approval Code (first 2 digits = country code).
FAC = Final Assembly Code (For Nokia FAC = 10).
SNR = Serial Number.
SP = Spare (always SP = 0).
** 04 * * staryyPIN novyyPIN novyyPIN
* # - Change PIN code
** 042 * * staryyPIN2 novyyPIN2 novyyPIN2 * # - Change PIN2 code
** 05 * PUK * * novyyPIN novyyPIN # - Unlock PIN code
** 052 * PUK2 * * novyyPIN2 novyyPIN2 # - Unlock PIN2
* # 35 # - Check the status of blocking all incoming calls
** 35 * code # - Activate to block all incoming calls
# 35 * code # - Disable block all incoming calls
* # 33 # - Check the lock status of all outgoing calls
** 33 * code # - Activate to block all outgoing calls
# 33 * code # - Disable block all outgoing calls
* # 330 * code # - Check the lock status of all calls
** 330 * code # - Activate to block all calls
# 330 * code # - Disable block all calls
** 042 * * staryyPIN2 novyyPIN2 novyyPIN2 * # - Change PIN2 code
** 05 * PUK * * novyyPIN novyyPIN # - Unlock PIN code
** 052 * PUK2 * * novyyPIN2 novyyPIN2 # - Unlock PIN2
* # 35 # - Check the status of blocking all incoming calls
** 35 * code # - Activate to block all incoming calls
# 35 * code # - Disable block all incoming calls
* # 33 # - Check the lock status of all outgoing calls
** 33 * code # - Activate to block all outgoing calls
# 33 * code # - Disable block all outgoing calls
* # 330 * code # - Check the lock status of all calls
** 330 * code # - Activate to block all calls
# 330 * code # - Disable block all calls
Panasonic
* 01763 * 737381 # -
master reset (user data, user code) A100, A101, A102, G50, G51, G70, GD55 ..
* 369 # (*) - MENU
746 menu, menu - lock menu
* # 9999 # - 5 sec after power on - SW version (GD75, GD67, GD87 ..)
Panasonic
everything from gd55 - ending seems to last ...
* 01763 * 737381 #
PANASONIC
G50, 51,55,70 - * 01763 * 737381 #
Panasonic
* 01763 * 737381 # - master reset (user data, user code) A100, A101, A102, G50, G51, G70, GD55 ..
* 369 # (*) - MENU
7, 4, 6, menu, menu - lock menu
* # 9999 # - 5 sec after power on - SW version (GD75, GD67, GD87 ..)
* 369 # (*) - MENU
746 menu, menu - lock menu
* # 9999 # - 5 sec after power on - SW version (GD75, GD67, GD87 ..)
Panasonic
everything from gd55 - ending seems to last ...
* 01763 * 737381 #
PANASONIC
G50, 51,55,70 - * 01763 * 737381 #
Panasonic
* 01763 * 737381 # - master reset (user data, user code) A100, A101, A102, G50, G51, G70, GD55 ..
* 369 # (*) - MENU
7, 4, 6, menu, menu - lock menu
* # 9999 # - 5 sec after power on - SW version (GD75, GD67, GD87 ..)
Pantech
Full reset (phone
code reset) - # # 03 * 934 # 9367 * 192 # 397 # 7412569746 PWR,
after reset - # # 27732726 PWR and select "with uim"
Code latch release Pantech * 01763 * 737381 *
In the end may be # or *
* 01763 * 8371 * SW version
* 01763 * 6371 * Unlock your phone?
* 01763 * 737381 * unlocked?
* 01763 * 3641 * ENGINR. MODE
* 01763 * 737381 # and * 01763 * 3641 #
how to turn off the menu if the engineering
He included code * 01763 * 3641 #
code off you can not enter
* Not only typed the first tsyfry
how to enter the code * 01763 * 3640 # (* 01763 * ENG0 #) - Disable the engineering mode
Hold the end call key five seconds and poluchish award for bravery from the representatives Pantech
BLANKET CODES - GENERAL CODES:
G500 G600 G700 G800 G900
* 01763 * 476 # --- Tests
* 01763 * 5640 # (* 01763 * LOG0 #) --- Disable LOG
* 01763 * 5641 # (* 01763 * LOG1 #) --- Enable LOG
* 01763 * 6370 # (* 01763 * MEP0 #) --- Disable MEP menu (unlock menu)
* 01763 * 6371 # (* 01763 * MEP1 #) --- Enable MEP menu (unlock menu)
* 01763 * 3640 # (* 01763 * ENG0 #) --- Disable Engineer Mode
* 01763 * 3641 # (* 01763 * ENG1 #) --- Enable Engineer Mode
after reset - # # 27732726 PWR and select "with uim"
Code latch release Pantech * 01763 * 737381 *
In the end may be # or *
* 01763 * 8371 * SW version
* 01763 * 6371 * Unlock your phone?
* 01763 * 737381 * unlocked?
* 01763 * 3641 * ENGINR. MODE
* 01763 * 737381 # and * 01763 * 3641 #
how to turn off the menu if the engineering
He included code * 01763 * 3641 #
code off you can not enter
* Not only typed the first tsyfry
how to enter the code * 01763 * 3640 # (* 01763 * ENG0 #) - Disable the engineering mode
Hold the end call key five seconds and poluchish award for bravery from the representatives Pantech
BLANKET CODES - GENERAL CODES:
G500 G600 G700 G800 G900
* 01763 * 476 # --- Tests
* 01763 * 5640 # (* 01763 * LOG0 #) --- Disable LOG
* 01763 * 5641 # (* 01763 * LOG1 #) --- Enable LOG
* 01763 * 6370 # (* 01763 * MEP0 #) --- Disable MEP menu (unlock menu)
* 01763 * 6371 # (* 01763 * MEP1 #) --- Enable MEP menu (unlock menu)
* 01763 * 3640 # (* 01763 * ENG0 #) --- Disable Engineer Mode
* 01763 * 3641 # (* 01763 * ENG1 #) --- Enable Engineer Mode
·
01763 * 63866330 # (* 01763 *
NETMODE0 #) --- Disable NetMode
* 01763 * 63866331 # (* 01763 * NETMODE1 #) --- Enable NetMode
* 01763 * 737381 # (* 01763 * RESET1 #) --- System reset (all default settings)
* 01763 * 546360 # --- LineN0
* 01763 * 546361 # --- LineN1
* 01763 * 546364 # --- LineN4
* 01763 * 546367 # --- LineN7
* 01763 * 34531 # ---?
* 01763 * 62766 # ---?
* 01763 * 727 # ---?
* 01763 * 68726 # ---?
* 01763 * 22637266 # (* 01763 * CAMERAON #) --- Camera test mode on
* 01763 * 225837 # ---?
G600 [GZBP0105102004 PANTECH ver 1.0]
* 01763 * 22637266 # (* 01763 * CAMERAON #) --- Camera test mode on
G800 [GLAP0006062004 G800 ver 1.0N]
* 01763 * 22637266 # (* 01763 * CAMERAON #) --- Camera test mode on
* 01763 * 79837 # (* 01763 * SWVER #) --- SoftWare version
* 01763 * 28271 # ---?
* 01763 * 28270 # ---?
* 01763 * 2873738 # ---?
* 01763 * 288 # ---?
* 01763 * 63866331 # (* 01763 * NETMODE1 #) --- Enable NetMode
* 01763 * 737381 # (* 01763 * RESET1 #) --- System reset (all default settings)
* 01763 * 546360 # --- LineN0
* 01763 * 546361 # --- LineN1
* 01763 * 546364 # --- LineN4
* 01763 * 546367 # --- LineN7
* 01763 * 34531 # ---?
* 01763 * 62766 # ---?
* 01763 * 727 # ---?
* 01763 * 68726 # ---?
* 01763 * 22637266 # (* 01763 * CAMERAON #) --- Camera test mode on
* 01763 * 225837 # ---?
G600 [GZBP0105102004 PANTECH ver 1.0]
* 01763 * 22637266 # (* 01763 * CAMERAON #) --- Camera test mode on
G800 [GLAP0006062004 G800 ver 1.0N]
* 01763 * 22637266 # (* 01763 * CAMERAON #) --- Camera test mode on
* 01763 * 79837 # (* 01763 * SWVER #) --- SoftWare version
* 01763 * 28271 # ---?
* 01763 * 28270 # ---?
* 01763 * 2873738 # ---?
* 01763 * 288 # ---?
·
G900 [GWBP0206282004 G900 ver 1.0b]
* 01763 * 22637266 # (* 01763 * CAMERAON #) --- Camera test mode on
* 01763 * 79837 # (* 01763 * SWVER #) --- SoftWare version
* 01763 * 92782 # --- copy UaData ..... copy httpUserAgent ..... Call Edit Mode:% s?
* 01763 * 927827763 # --- copy UaProfData ..... copy httpUserAgentProf .....
Master codes for your phone Pantech HX-550C
Full reset (phone code reset) - # 03 * 934 # 9367 * 192 # 397 # 7412569746 PWR, after reset - # # 27732726 PWR and select "with uim"
* 01763 * 737381 # - master reset (user data, user code) without SIM
* 01763 * 8371 # - SW version
* 01763 * 6371 # - UNLOCK
* 01763 * 3641 # - Menu
Pantech
* 01763 * 737381 # - master reset (user data, user code) without SIM
* 01763 * 8371 # - SW version
* 01763 * 6371 # - UNLOCK
* 01763 * 3641 # - Menu
G900 [GWBP0206282004 G900 ver 1.0b]
* 01763 * 22637266 # (* 01763 * CAMERAON #) --- Camera test mode on
* 01763 * 79837 # (* 01763 * SWVER #) --- SoftWare version
* 01763 * 92782 # --- copy UaData ..... copy httpUserAgent ..... Call Edit Mode:% s?
* 01763 * 927827763 # --- copy UaProfData ..... copy httpUserAgentProf .....
Master codes for your phone Pantech HX-550C
Full reset (phone code reset) - # 03 * 934 # 9367 * 192 # 397 # 7412569746 PWR, after reset - # # 27732726 PWR and select "with uim"
* 01763 * 737381 # - master reset (user data, user code) without SIM
* 01763 * 8371 # - SW version
* 01763 * 6371 # - UNLOCK
* 01763 * 3641 # - Menu
Pantech
* 01763 * 737381 # - master reset (user data, user code) without SIM
* 01763 * 8371 # - SW version
* 01763 * 6371 # - UNLOCK
* 01763 * 3641 # - Menu
Philips
# 20021208 # ok - 630
without SIM (erase flash)
* # 7728 * # - RSAV DONE
* # 3849 * # -?? reboot
* # 3851 * # -?? reboot
Philips 568 * 01763 * 737381 # - reset
GENE
Shows IMEI
Shows the secret code machine
View information about the SIM card
Information on the SIM card lock, Init and Flags. Sometimes it is extremely useful.
Activate and deactivate Sleep Mode (Sleep)
View information about Sleep Mode
Opening a new section in the user menu "Closed User Group"
Disconnects and includes hours AET charges the battery when the phone is connected to a charger
How to disable time and date
Enables or disables the "Debug Call Mode" (if you call a busy line, appear on the screen some hex codes apparatus.)
Genie (TCD838)
* # 2337 * # activate the alarm when the phone re connected to the network.
 Reset to Philips
* # 7489 * #
* # 7728 * # - RSAV DONE
* # 3849 * # -?? reboot
* # 3851 * # -?? reboot
Philips 568 * 01763 * 737381 # - reset
GENE
Shows IMEI
Shows the secret code machine
View information about the SIM card
Information on the SIM card lock, Init and Flags. Sometimes it is extremely useful.
Activate and deactivate Sleep Mode (Sleep)
View information about Sleep Mode
Opening a new section in the user menu "Closed User Group"
Disconnects and includes hours AET charges the battery when the phone is connected to a charger
How to disable time and date
Enables or disables the "Debug Call Mode" (if you call a busy line, appear on the screen some hex codes apparatus.)
Genie (TCD838)
* # 2337 * # activate the alarm when the phone re connected to the network.
 Reset to Philips
* # 7489 * #
Sagem
Sagem * 226632623X7,
where X = 4 or 5 down *
removal of the code on older cell phones Sagem
never tried it (but it helps to say)))
No cards have amassed * 226632623X7, where X = 4 or 5 for your phone and then set the time you get a menu where the screen crawls polosa.Nazhimaesh down arrow and *, appears MENU Hotline and Info telefon, click OK and you see the fourth row from the top of RCD PHONE, you come and wash it \
removal of the code on older cell phones Sagem
never tried it (but it helps to say)))
No cards have amassed * 226632623X7, where X = 4 or 5 for your phone and then set the time you get a menu where the screen crawls polosa.Nazhimaesh down arrow and *, appears MENU Hotline and Info telefon, click OK and you see the fourth row from the top of RCD PHONE, you come and wash it \
Samsung
Samsung * # 9998 *
947 # (without SIM)
Standard Code - 1234 or 0000
reset eprom: * 2767 * 2878 # (removing code)
X100, X600 - remove simlock # * 7337 # lock list * # 7465625 #
* 2767 * 3855 # - FULL E2P RESET
* 2767 * 2878 # - CUSTOM E2P RESET
# * 7337 # - UNLOCK
* 2767 * 688 # - UNLOCK
* # 0523 # - CONTRAST
* # 9998 * 523 # - CONTRAST
* # 8999 * 8378 # - Service Menu (X100)
SGH-600
* # 06 # -> Show IMEI.
* # 9999 # -> Show Software Version.
* # 0837 # -> Show Software Version (instructions)
* # 0001 # -> Show Serial options
* # 9125 # -> Activates the smiley when charging.
* # 9998 * 228 # -> Battery status (capacity, voltage, temperature)
* # 9998 * 246 # -> Program status
* # 9998 * 289 # -> Change the frequency of calls
* # 9998 * 324 # -> Display Debugger
* # 9998 * 364 # -> Watchdog
* # 9998 * 377 # -> EEPROM Error Stack - Use side keys to select values. Cancel and ok.
* # 9998 * 427 # -> Trace Watchdog
* # 9998 * 523 # -> Change the display contrast - Only for version G60RL01W
* # 9998 * 544 # -> Jig detect
Standard Code - 1234 or 0000
reset eprom: * 2767 * 2878 # (removing code)
X100, X600 - remove simlock # * 7337 # lock list * # 7465625 #
* 2767 * 3855 # - FULL E2P RESET
* 2767 * 2878 # - CUSTOM E2P RESET
# * 7337 # - UNLOCK
* 2767 * 688 # - UNLOCK
* # 0523 # - CONTRAST
* # 9998 * 523 # - CONTRAST
* # 8999 * 8378 # - Service Menu (X100)
SGH-600
* # 06 # -> Show IMEI.
* # 9999 # -> Show Software Version.
* # 0837 # -> Show Software Version (instructions)
* # 0001 # -> Show Serial options
* # 9125 # -> Activates the smiley when charging.
* # 9998 * 228 # -> Battery status (capacity, voltage, temperature)
* # 9998 * 246 # -> Program status
* # 9998 * 289 # -> Change the frequency of calls
* # 9998 * 324 # -> Display Debugger
* # 9998 * 364 # -> Watchdog
* # 9998 * 377 # -> EEPROM Error Stack - Use side keys to select values. Cancel and ok.
* # 9998 * 427 # -> Trace Watchdog
* # 9998 * 523 # -> Change the display contrast - Only for version G60RL01W
* # 9998 * 544 # -> Jig detect
·
# 9998 * 636 # -> Memory status
* # 9998 * 746 # -> SIM File Size
* # 9998 * 778 # -> SIM Service Table
* # 9998 * 785 # -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error.
* # 9998 * 786 # -> Run, Last UP, Last DOWN
* # 9998 * 837 # -> Software version
* # 9998 * 842 # -> Test Vibrator - Flash the screen flashes for 10 seconds and vibration activated.
* # 9998 * 862 # -> Vocoder Reg - Normal, Earphone or carkit can be selected
* # 9998 * 872 # -> Diag
* # 9998 * 947 # -> Reset On Fatal Error
* # 9998 * 999 # -> Last / Chk
* # 9998 * 9266 # -> Yann debug screen (= Debug Screens?)
* # 9998 * 9999 # -> Software version
* 0001 * s * f * t # -> Changes serial parameters (s =?, F = 0,1, t = 0,1) (incomplete)
* 0002 *? # -> Unknown
* 0003 *? # -> Unknown
SP-unlock SGH-600 and SGH 2100
* 2767 * 3855 # -> Full reset l EEPROM (THIS CODE REMOVES SP-blokirovku!)
But also changes IMEI to 447967-89-400044-0, To restore your old IMEI use the corresponding software (at your own risk)
* 2767 * 2878 # -> reset user EEEPROM
This code was tested on Samsung SGH-600 with software version FLD_2C6 G60SB03X
SAMSUNG
a800 unlock - * 2767 * 637 #
Samsung
x100, x600 -
Unlock: # * 7337 #
* # 9998 * 746 # -> SIM File Size
* # 9998 * 778 # -> SIM Service Table
* # 9998 * 785 # -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error.
* # 9998 * 786 # -> Run, Last UP, Last DOWN
* # 9998 * 837 # -> Software version
* # 9998 * 842 # -> Test Vibrator - Flash the screen flashes for 10 seconds and vibration activated.
* # 9998 * 862 # -> Vocoder Reg - Normal, Earphone or carkit can be selected
* # 9998 * 872 # -> Diag
* # 9998 * 947 # -> Reset On Fatal Error
* # 9998 * 999 # -> Last / Chk
* # 9998 * 9266 # -> Yann debug screen (= Debug Screens?)
* # 9998 * 9999 # -> Software version
* 0001 * s * f * t # -> Changes serial parameters (s =?, F = 0,1, t = 0,1) (incomplete)
* 0002 *? # -> Unknown
* 0003 *? # -> Unknown
SP-unlock SGH-600 and SGH 2100
* 2767 * 3855 # -> Full reset l EEPROM (THIS CODE REMOVES SP-blokirovku!)
But also changes IMEI to 447967-89-400044-0, To restore your old IMEI use the corresponding software (at your own risk)
* 2767 * 2878 # -> reset user EEEPROM
This code was tested on Samsung SGH-600 with software version FLD_2C6 G60SB03X
SAMSUNG
a800 unlock - * 2767 * 637 #
Samsung
x100, x600 -
Unlock: # * 7337 #
·
Customer Reset: "* 2767 *
2878 #".
WAP Reset: "* 2767 * 927 #"
Full Reset: "* 2767 * 3855 #"
Samsung
* 2767 * 3855 # - FULL E2P RESET
* 2767 * 2878 # - CUSTOM E2P RESET
# * 7337 # - UNLOCK
* 2767 * 688 # - UNLOCK
* # 0523 # - CONTRAST
* # 9998 * 523 # - CONTRAST
* # 8999 * 8378 # - Service Menu (X100)
WAP Reset: "* 2767 * 927 #"
Full Reset: "* 2767 * 3855 #"
Samsung
* 2767 * 3855 # - FULL E2P RESET
* 2767 * 2878 # - CUSTOM E2P RESET
# * 7337 # - UNLOCK
* 2767 * 688 # - UNLOCK
* # 0523 # - CONTRAST
* # 9998 * 523 # - CONTRAST
* # 8999 * 8378 # - Service Menu (X100)
unlock cell phone Siemens ST55
* 01763 * 737381 #
enter 11 times.
S60 Siries (SX1, 6600, N-Gage ..) ------------------
* # 7780 # - factory default
* # 7370 # - full factory defaults (all user data reset)
SX1 formating - * # power on
6600 formating - 3 * send power on
Sendo X1 formating - 5 power on
removal code siemens st60:
Model: Siemens ST60
- Remove Sim Card
- Enter this code 11 times:
** 00012 * 00000000 #
- Do not pay attention to the 'Code Error' reported
if someone else remembers it is a miracle -
Unlock Siemens S40/42:
* # 337 #
SIEMENS
* # 06 # - Phone Identifier (IMEI)
* # 06 # and left softkey - firmware and protocols supported
* # 0000 # and green key - automatic language selection
* 01763 * 737381 #
enter 11 times.
S60 Siries (SX1, 6600, N-Gage ..) ------------------
* # 7780 # - factory default
* # 7370 # - full factory defaults (all user data reset)
SX1 formating - * # power on
6600 formating - 3 * send power on
Sendo X1 formating - 5 power on
removal code siemens st60:
Model: Siemens ST60
- Remove Sim Card
- Enter this code 11 times:
** 00012 * 00000000 #
- Do not pay attention to the 'Code Error' reported
if someone else remembers it is a miracle -
Unlock Siemens S40/42:
* # 337 #
SIEMENS
* # 06 # - Phone Identifier (IMEI)
* # 06 # and left softkey - firmware and protocols supported
* # 0000 # and green key - automatic language selection
·
# 0001 # and gren key - English
* # 9999 # - factory setting (does not change the setting to the SIM card)
* # 0606 # and press upper left button - show the presence of locks (only works without sim-card)
* # 0003 * (secret code 8 digits) # - removal zalochki
* 3370 #, cancellation # 3370 # - Improves sound quality and reception but faster sadit battery (EFR - Enhanced Full Rate, a system for improved call quality in the phones GSM, due to more rapid discharge of the battery (about 5%). EFR uses advanced encryption to improve the quality of the call, not expanding bandwidth)
* 4720 #, cancellation # 4720 # - Reduces the reception quality but increases battery discharge time (HFR - Half Rate, prolongs battery life somewhere about 30 percent, due to a decrease of about half the bandwidth)
Smartphones Siemens (SX1)
* # 2820 # - individual name «Bluetooth».
* # 7780 # - Restore the original settings.
* # 7370 # - Full reset. (Erased software, phone book, SMS, etc.)
To use the latter two codes will need to enter your phone lock code (default 12345)!
* # 0606 # - check the body on the hull. Should all stand on Unbarried. (Only for Siemens)
unlock
Siemens st60-** 00012 * 00000000 #
* # 9999 # - factory setting (does not change the setting to the SIM card)
* # 0606 # and press upper left button - show the presence of locks (only works without sim-card)
* # 0003 * (secret code 8 digits) # - removal zalochki
* 3370 #, cancellation # 3370 # - Improves sound quality and reception but faster sadit battery (EFR - Enhanced Full Rate, a system for improved call quality in the phones GSM, due to more rapid discharge of the battery (about 5%). EFR uses advanced encryption to improve the quality of the call, not expanding bandwidth)
* 4720 #, cancellation # 4720 # - Reduces the reception quality but increases battery discharge time (HFR - Half Rate, prolongs battery life somewhere about 30 percent, due to a decrease of about half the bandwidth)
Smartphones Siemens (SX1)
* # 2820 # - individual name «Bluetooth».
* # 7780 # - Restore the original settings.
* # 7370 # - Full reset. (Erased software, phone book, SMS, etc.)
To use the latter two codes will need to enter your phone lock code (default 12345)!
* # 0606 # - check the body on the hull. Should all stand on Unbarried. (Only for Siemens)
unlock
Siemens st60-** 00012 * 00000000 #
Sony Ericsson
unlock Sony J5 / J6 /
J70 / J70
and probably the old Z - series ...
* # 73287489263373738 #
> * <<* <* - Service menu
<* * <- Lock menu
CMD-Z1
* # 06 # displays IMEI (International Mobile Equipment Identity) code
The following code displays information about the software in the first line and detail. on the CPU and OS in the second and third row.
# 8377466 # (# version #)
In earlier versions of the above mentioned code does not work, but you can try the following:
In the OSM PHONE SETTINGS - FACTORY SETTINGS and click once. The display will show "Factory Setting Yes No". Do not do or anything more, leave this menu, for what it is.
Move the main switch the phone a bit to the right (a little means so that contact was interrupted, but not long enough to turn off the phone)
Now we collect
# * 04
On display will be information about the software.
this is for Sony Eriksson
works for the K500 and K700
>*<<*<*
and probably the old Z - series ...
* # 73287489263373738 #
> * <<* <* - Service menu
<* * <- Lock menu
CMD-Z1
* # 06 # displays IMEI (International Mobile Equipment Identity) code
The following code displays information about the software in the first line and detail. on the CPU and OS in the second and third row.
# 8377466 # (# version #)
In earlier versions of the above mentioned code does not work, but you can try the following:
In the OSM PHONE SETTINGS - FACTORY SETTINGS and click once. The display will show "Factory Setting Yes No". Do not do or anything more, leave this menu, for what it is.
Move the main switch the phone a bit to the right (a little means so that contact was interrupted, but not long enough to turn off the phone)
Now we collect
# * 04
On display will be information about the software.
this is for Sony Eriksson
works for the K500 and K700
>*<<*<*
Standart Gsm Kod
Standard GSM codes
These codes are recruited to serve as a GSM phone to enable or disable a variety of standard features and services. Some of them duplicate the functions of the menu, some not.
Symbols:
@ = Button sends (tube, OK, YES, Navi)
** = Enable or enhance
* = Active
# # = Turn off or deactivate
# = Inactive
CHANGE PIN CODE
Change PIN 1 ** 04 * * staryyPIN1 novyyPIN1 novyyPIN1 * # @
Change PIN 2 ** 042 * * staryyPIN2 novyyPIN2 novyyPIN2 * # @
Unlock PIN 1 ** 05 * PUK * novyyPIN1 novyyPIN1 * # @
Unlock PIN 2 ** 052 * PUK2 * * novyyPIN2 novyyPIN2 # @
PUK - code kotroy must be granted by the operator when buying a phone or connection. Without this code, or ten times entering an incorrect PUK, your phone will be completely blocked!
SHOW IMEI
Show IMEI * # 06 #
If the code is obtained by typing this command and the code on the back of the phone does not match, then your phone might "gray".
Call Forwarding
Deactivate all call forwarding # # 002 # @
Deactivate all conditional call forwarding # # 004 # @
Activate all conditional call forwarding ** 004 * PhoneNumber # @
These codes are recruited to serve as a GSM phone to enable or disable a variety of standard features and services. Some of them duplicate the functions of the menu, some not.
Symbols:
@ = Button sends (tube, OK, YES, Navi)
** = Enable or enhance
* = Active
# # = Turn off or deactivate
# = Inactive
CHANGE PIN CODE
Change PIN 1 ** 04 * * staryyPIN1 novyyPIN1 novyyPIN1 * # @
Change PIN 2 ** 042 * * staryyPIN2 novyyPIN2 novyyPIN2 * # @
Unlock PIN 1 ** 05 * PUK * novyyPIN1 novyyPIN1 * # @
Unlock PIN 2 ** 052 * PUK2 * * novyyPIN2 novyyPIN2 # @
PUK - code kotroy must be granted by the operator when buying a phone or connection. Without this code, or ten times entering an incorrect PUK, your phone will be completely blocked!
SHOW IMEI
Show IMEI * # 06 #
If the code is obtained by typing this command and the code on the back of the phone does not match, then your phone might "gray".
Call Forwarding
Deactivate all call forwarding # # 002 # @
Deactivate all conditional call forwarding # # 004 # @
Activate all conditional call forwarding ** 004 * PhoneNumber # @
Forwarding of all calls
Deactivate and Disable forwarding calls to another number # # 21 # @
Deactivate call forwarding to another number # 21 # @
Define number and activate call forwarding to another number ** 21 * PhoneNumber # @
Activate call forwarding to another number * 21 # @
Check the status of call forwarding to another number * # 21 # @
FORWARDING if no one answers the bell
Activate call forwarding to another number if no answer ** 61 * PhoneNumber # @
Deactivate or turn off call forwarding if no answer # # 61 # @
Deactivate call forwarding if no answer # 61 # @
Activate call forwarding if no answer * 61 # @
Check the status of call forwarding if no answer * # 61 # @
FORWARDING In case the subscriber is out of coverage
Activate call forwarding to another number if the subscriber is out of coverage ** 62 * PhoneNumber # @
Activate call forwarding when the subscriber is out of coverage * 62 # @
Deactivate or turn off call forwarding if the subscriber is out of coverage # # 62 # @
Deactivate call forwarding when the subscriber is outside the coverage area # 62 # @
Check the status of call forwarding when the subscriber is out of coverage * # 62 # @
FORWARDING IF the phone is busy
Activate call forwarding to another number if your phone is busy ** 67 * PhoneNumber # @
Activate automatic call forwarding when the phone is busy * 67 # @
Deactivate or turn off call forwarding when the phone is busy # # 67 # @
Deactivate call forwarding when the phone is busy # 67 # @
Check the status of automatic redirection if the phone is busy * # 67 # @
INSTALLATION number of rings before activation FORWARDING
N = 5-30 (seconds)
Deactivate and Disable forwarding calls to another number # # 21 # @
Deactivate call forwarding to another number # 21 # @
Define number and activate call forwarding to another number ** 21 * PhoneNumber # @
Activate call forwarding to another number * 21 # @
Check the status of call forwarding to another number * # 21 # @
FORWARDING if no one answers the bell
Activate call forwarding to another number if no answer ** 61 * PhoneNumber # @
Deactivate or turn off call forwarding if no answer # # 61 # @
Deactivate call forwarding if no answer # 61 # @
Activate call forwarding if no answer * 61 # @
Check the status of call forwarding if no answer * # 61 # @
FORWARDING In case the subscriber is out of coverage
Activate call forwarding to another number if the subscriber is out of coverage ** 62 * PhoneNumber # @
Activate call forwarding when the subscriber is out of coverage * 62 # @
Deactivate or turn off call forwarding if the subscriber is out of coverage # # 62 # @
Deactivate call forwarding when the subscriber is outside the coverage area # 62 # @
Check the status of call forwarding when the subscriber is out of coverage * # 62 # @
FORWARDING IF the phone is busy
Activate call forwarding to another number if your phone is busy ** 67 * PhoneNumber # @
Activate automatic call forwarding when the phone is busy * 67 # @
Deactivate or turn off call forwarding when the phone is busy # # 67 # @
Deactivate call forwarding when the phone is busy # 67 # @
Check the status of automatic redirection if the phone is busy * # 67 # @
INSTALLATION number of rings before activation FORWARDING
N = 5-30 (seconds)
Set number of rings
NomerGolosovoyPochty ** 61 * ** N # @
Cancel the previous setting # # 61 # @
BAN all outgoing calls
Change password for call barring ** 03 * 330 * * staryyParol novyyParol novyyParol * # @
Activate all outgoing calls ** 33 * Password # @
Deactivate all outgoing calls # 33 * Password # @
Check the status of all outgoing calls * # 33 # @
BAN ALL CALL
Activate ban all calls ** 330 * Password # @
Deactivate ban all calls # 330 * Password # @
Check the status of the prohibition of all calls * # 330 * Password # @
BAN all outgoing international calls
Activate all outgoing international calls ** 331 * Password # @
Deactivate all outgoing international calls # 331 * Password # @
Check the status of all outgoing international calls * # 331 # @
BAN all outgoing calls
Activate all outgoing calls ** 333 * Password # @
Deactivate all outgoing calls # 333 * Password # @
Check the status of all outgoing calls * # 333 # @
Barring Incoming Calls
Activate all incoming calls ** 35 * PW # @ or ** 353 * Password # @
Deactivate all incoming calls # 35 * PW # @ or ** 353 * Password # @
Check the status of all incoming calls * # 35 # @ or * # 353 # @
BAN all incoming calls when roaming
Cancel the previous setting # # 61 # @
BAN all outgoing calls
Change password for call barring ** 03 * 330 * * staryyParol novyyParol novyyParol * # @
Activate all outgoing calls ** 33 * Password # @
Deactivate all outgoing calls # 33 * Password # @
Check the status of all outgoing calls * # 33 # @
BAN ALL CALL
Activate ban all calls ** 330 * Password # @
Deactivate ban all calls # 330 * Password # @
Check the status of the prohibition of all calls * # 330 * Password # @
BAN all outgoing international calls
Activate all outgoing international calls ** 331 * Password # @
Deactivate all outgoing international calls # 331 * Password # @
Check the status of all outgoing international calls * # 331 # @
BAN all outgoing calls
Activate all outgoing calls ** 333 * Password # @
Deactivate all outgoing calls # 333 * Password # @
Check the status of all outgoing calls * # 333 # @
Barring Incoming Calls
Activate all incoming calls ** 35 * PW # @ or ** 353 * Password # @
Deactivate all incoming calls # 35 * PW # @ or ** 353 * Password # @
Check the status of all incoming calls * # 35 # @ or * # 353 # @
BAN all incoming calls when roaming
Activate all incoming calls when
roaming ** 351 * Password # @
Deactivate all incoming calls when roaming # 351 * Password # @
Check the status of all incoming zvonkovpri roaming * # 351 # @
Activate call waiting * 43 # @
Deactivate call waiting # 43 # # @
Check the status of call waiting * # 43 # @
Make or NO PREMISES Your telephone number When calling
Prohibit the sending of your phone number # 30 # PhoneNumber @
Allow sending your phone number * 30 # PhoneNumber @
Check the status of sending your phone number * # 30 #
CODES FOR PREMISES / CLIR FOR INCOMING CALLS
Forbid the caller ID on your phone * 77 #
Allow caller ID on your phone # 77 # @
Check the status display caller ID on your phone * # 77 # @
Deactivate all incoming calls when roaming # 351 * Password # @
Check the status of all incoming zvonkovpri roaming * # 351 # @
Activate call waiting * 43 # @
Deactivate call waiting # 43 # # @
Check the status of call waiting * # 43 # @
Make or NO PREMISES Your telephone number When calling
Prohibit the sending of your phone number # 30 # PhoneNumber @
Allow sending your phone number * 30 # PhoneNumber @
Check the status of sending your phone number * # 30 #
CODES FOR PREMISES / CLIR FOR INCOMING CALLS
Forbid the caller ID on your phone * 77 #
Allow caller ID on your phone # 77 # @
Check the status display caller ID on your phone * # 77 # @
Vk Mobile
*#79# - SW version
*#85*364# (*) - hold menu
855855# without SIM (VG107)
85558555#(*)-hold
4268#(*)-hold (VG207)
ÑнÑтие кода на Ñотовом телефоне vk mobile
85558555# и удерживаем*
*#85*364# и *удерж.
VK Mobile
*#79# - SW version
*#85*364# (*) - hold menu
855855# without SIM (VG107)
85558555#(*)-hold
4268#(*)-hold (VG207)
*#85*364# (*) - hold menu
855855# without SIM (VG107)
85558555#(*)-hold
4268#(*)-hold (VG207)
ÑнÑтие кода на Ñотовом телефоне vk mobile
85558555# и удерживаем*
*#85*364# и *удерж.
VK Mobile
*#79# - SW version
*#85*364# (*) - hold menu
855855# without SIM (VG107)
85558555#(*)-hold
4268#(*)-hold (VG207)
Voxtel
0124 - master code
0718#(*)- hold - menu (ST11, SC10, V100 without SIM)
4268#(*)- hold - show code (ST11, SC10 without SIM)
*789(#)- hold - menu (V50, RX100 without SIM)
Voxtel
0124 - master code
0718#(*)- hold - menu (ST11, SC10, V100 without SIM)
4268#(*)- hold - show code (ST11, SC10 without SIM)
*789(#)- hold - menu (V50, V300, RX100 without SIM)
0718#(*)- hold - menu (ST11, SC10, V100 without SIM)
4268#(*)- hold - show code (ST11, SC10 without SIM)
*789(#)- hold - menu (V50, RX100 without SIM)
Voxtel
0124 - master code
0718#(*)- hold - menu (ST11, SC10, V100 without SIM)
4268#(*)- hold - show code (ST11, SC10 without SIM)
*789(#)- hold - menu (V50, V300, RX100 without SIM)
2 comments:
Please I need unlock code for Tecno T463
I know the exact way to hard reset oppo phone. See this video : how to reset or reboot oppo cell phone
Post a Comment
Thanks For Your Comments.